Rhino
Primary and secondary containment systems
WięcejBelow are some Rhino Linings products that are most frequently used in containment applications:
Rhino Extreme™
WięcejProperties
- Excellent for cold substrate application
- Excellent for low and hot temperature conditions
- Excellent for high humidity conditions
- Good for abrasion & impact resistance
- Good for chemical and corrosion protection
- Excellent resistance to thermal shock
Typical applications
- Primary and secondary containment as a monolithic, impermeable lining for industrial plants, agriculture, and petrochemical applications
- Outdoor applications with water, humidity or low temperatures conditions
- Floor and wall protection in food processing, food storage, veterinary, production areas and laboratories
- Demanding fast setting/curing conditions
- Highly corrosive applications
HiChem™
WięcejHiChem has a Shore D 70 hardness, and it is Rhino’s most rigid formulation with the highest amount of molecular cross-linking in its formulation. Depending on the ratio formulation and gel time, elongation can range from 10% to 40%, giving this hard coating some flexibility. HiChem is available in both 2:1 and 1:1 ratio formulations. HiChem 21-70-90 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
HiChem PW meets the NSF/ANSI 61 potable water standard. HiChem PW shares the HiChem formulation as the most chemical resistant product, remaining stable in a variety of immersion applications. It is typically sprayed on metal and concrete surfaces, but it can adhere to almost any substrate. HiChem PW provides excellent corrosion resistance and will not deteriorate from most chemical attacks.
Properties
- Excellent for water and chemical resistance
- Excellent for corrosion protection
- Good for sound reduction
Typical applications
- High chemical protection applications
- Chemical processing equipment
- Concrete protection from sulfide-based gasses
- Primary containment
- Secondary containment
- Immersion service
- Oil/petroleum production
- Tank coatings
- Pipelines
- Settling tanks
- Sewage tanks
Hardline©
WięcejHardLine has a Shore D 55 (ASTM D2240) hardness and a 50-80% (ASTM D412) elongation for the 2:1 ratio formulation and 125-175% (ASTM D412) elongation for the 1:1 ratio formulation which is designed for harder surface protection and has excellent chemical resistance. HardLine 21-55-120 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
Properties
- High tensile strength and tear strength properties
- Very good abrasion and impact resistance
- Good chemical resistance
- Excellent corrosion resistance
- Good noise reduction
Typical applications
- Casting material for material handling eq. (chutes, hoppers, rollers)
- General purpose lining applications
- Truck beds requiring hard as nails protection
- High impact applications
- Material handling and flooring applications where products or vehicles side across a surface
- Primary & Secondary Chemical Containment
- Water and Wastewater Facilities
- Sedimentation Basins
- Pump Stations
- Pipes – Outside
- Light vehicular and foot traffic
Rhino Hybrid™
WięcejRhino Hybrid has a Shore D 55+/- (ASTM D2240) hardness and a 90-100% (ASTM D412) elongation for the 2:1 ratio formulation and a 250% (ASTM D412) elongation for the 1:1 ratio formulation. It is an excellent cost-effective alternative for HardLine® and requires high-pressure plural equipment.
Properties
- Excellent for high humidity conditions
- Excellent for low and hot temperature conditions
- Excellent for corrosion protection
- Good for chemical resistance
- Good for weatherability
Typical applications
- Primary and Secondary Containment
- Indoor use during high humidity and low and high temperature conditions
- Floors / Storage areas
- Pump Stations / Sludge Tanks
Rhino Linings has specifically formulated a number of products for use with potable water. Each of these products have been through rigorous testing and meet strict NSF/ANSI 61 standards for use with potable water.
HiChem 11-70 PW
WięcejHiChem has a Shore D 70 hardness, and it is Rhino’s most rigid formulation with the highest amount of molecular cross-linking in its formulation. Depending on the ratio formulation and gel time, elongation can range from 10% to 40%, giving this hard coating some flexibility. HiChem is available in both 2:1 and 1:1 ratio formulations. HiChem 21-70-90 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
HiChem PW meets the NSF/ANSI 61 potable water standard. HiChem PW shares the HiChem formulation as the most chemical resistant product, remaining stable in a variety of immersion applications. It is typically sprayed on metal and concrete surfaces, but it can adhere to almost any substrate. HiChem PW provides excellent corrosion resistance and will not deteriorate from most chemical attacks.
Properties
- Excellent for water and chemical resistance
- Excellent for corrosion protection
- Good for sound reduction
Typical applications
- High chemical protection applications
- Chemical processing equipment
- Concrete protection from sulfide-based gasses
- Primary containment
- Secondary containment
- Immersion service
- Oil/petroleum production
- Tank coatings
- Pipelines
- Settling tanks
- Sewage tanks
Pipeliner 5000
WięcejPipeLiner 5000 11-70 PW is a two-component, 1:1 ratio, rapid curing, elastomeric structural lining systems developed for high build applications of 30 – 500 mil cross sections. Pipeliner 5000 can be sprayed in low temperatures, extremely humid conditions and at 350-400 mils thick, or almost 3/8 of an inch, in a single pass without stress cracking.
Pipeliner 5000 has passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 potable water standard and is Truesdail Laboratories listed. The polyurea/polyurethane systems are sprayed with high-pressure plural component spray equipment and can also be sprayed with a cartridge gun for repairs. The thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.
Properties
- Complies with NSF/ANSI 61 Section 5 potable water standard
- Rapid cure times for quick return to service
- High build cross sections
- Robust application window with ability to spray at low temperatures and high humidity
- High physical properties including tensile, tear, and compressive properties
- Excellent leveling properties
- Excellent impact resistance
- Excellent chemical resistance and corrosion resistance
- Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
- 100% solids, zero VOCs, no solvents
Typical applications
- Often used to repair aging and badly damaged gas, oil, sewer and water/wastewater tanks and pipelines
- Creates self-supporting polyurea pipe with a pipe
- Maintenance coating in immersion conditions
- Concrete waterproofing
- Geotextile fabric lining
- Holding tanks
- Containment areas
- Ponds and reservoirs
- Storage tanks
- Aerators, digesters, sludge bins & wet wells
Water and wastewater
WięcejSuggested products for humid environments are:
Seria HiChem™
WięcejProperties
- Excellent for water and chemical resistance
- Excellent for corrosion protection
- Good for sound reduction
Typical applications
- High chemical protection applications
- Chemical processing equipment
- Concrete protection from sulfide-based gasses
- Primary containment
- Secondary containment
- Immersion service
- Oil/petroleum production
- Tank coatings
- Pipelines
- Settling tanks
- Sewage tanks
Seria Pipeliner™
WięcejProperties
- Complies with NSF/ANSI 61 Section 5 potable water standard
- Rapid cure times for quick return to service
- High build cross sections
- Robust application window with ability to spray at low temperatures and high humidity
- High physical properties including tensile, tear, and compressive properties
- Excellent leveling properties
- Excellent impact resistance
- Excellent chemical resistance and corrosion resistance
- Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
- 100% solids, zero VOCs, no solvents
Typical applications
- Often used to repair aging and badly damaged gas, oil, sewer and water/wastewater tanks and pipelines
- Creates self-supporting polyurea pipe with a pipe
- Maintenance coating in immersion conditions
- Concrete waterproofing
- Geotextile fabric lining
- Holding tanks
- Containment areas
- Ponds and reservoirs
- Storage tanks
- Aerators, digesters, sludge bins & wet wells
Flooring
WięcejTypical applications
- Automotive
- Aviation Hangars
- Commercial Kitchens
- Hospitals
- Hotels/Casinos
- Manufacturing Plants
- Power Plants
- Prisons
- Pulp & Paper Mills
- Railcar Facilities
- Refineries
- Retail Stores
- Schools
- Waste Water Plants
- Zoo & Veterinary Facilities
Main benefits
Epoxy
- 15 year use
- Easy to use and apply
- Low odor, high solids
- Roll, trowel, slurry & broadcast
- Robust application window
- Abrasion & chemical resistance
Polyaspartic
- One day return-to-service
- UV resistance & high gloss
- Decoratice or hi-build formulations
- Monolithically bonds to surfaces
- Robust application window
- Abrasion & chemical resistance
Polyurethane
- NSF 61 certified
- Great for vibration reduction
- Proven elongation strength
- Monolithically bonds to surfaces
- Cold substrates & high humidity
- Abrasion & chemical resistance
For more information, please contact us.
Ochrona chemiczna
WięcejFrom protecting and maintaing tanks and equipment in order to reduce replacement and repair costs to sealing secondary containment basins to ensure harsh chemicals never leech into the surrounding environment, Rhino Linings is a smart investment that helps ensure your resources are protected. In addition to sprayed-on polyurethanes, polyureas and hybrid protective coatings, Rhino Linings offers 100% solids (Zero VOC) polymers as well as conventional high solids, epoxy coatings and primers that can be sprayed, rolled or trowel-applied to prepared concrete, geotextile, fiberglass, metal or earthen substrates.
Below are some Rhino Linings products that are most frequently used in containment applications:
Rhino Extreme™
WięcejProperties
- Excellent for cold substrate application
- Excellent for low and hot temperature conditions
- Excellent for high humidity conditions
- Good for abrasion & impact resistance
- Good for chemical and corrosion protection
- Excellent resistance to thermal shock
Typical applications
- Primary and secondary containment as a monolithic, impermeable lining for industrial plants, agriculture, and petrochemical applications
- Outdoor applications with water, humidity or low temperatures conditions
- Floor and wall protection in food processing, food storage, veterinary, production areas and laboratories
- Demanding fast setting/curing conditions
- Highly corrosive applications
HiChem™
WięcejHiChem has a Shore D 70 hardness, and it is Rhino’s most rigid formulation with the highest amount of molecular cross-linking in its formulation. Depending on the ratio formulation and gel time, elongation can range from 10% to 40%, giving this hard coating some flexibility. HiChem is available in both 2:1 and 1:1 ratio formulations. HiChem 21-70-90 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
HiChem PW meets the NSF/ANSI 61 potable water standard. HiChem PW shares the HiChem formulation as the most chemical resistant product, remaining stable in a variety of immersion applications. It is typically sprayed on metal and concrete surfaces, but it can adhere to almost any substrate. HiChem PW provides excellent corrosion resistance and will not deteriorate from most chemical attacks.
Properties
- Excellent for water and chemical resistance
- Excellent for corrosion protection
- Good for sound reduction
Typical applications
- High chemical protection applications
- Chemical processing equipment
- Concrete protection from sulfide-based gasses
- Primary containment
- Secondary containment
- Immersion service
- Oil/petroleum production
- Tank coatings
- Pipelines
- Settling tanks
- Sewage tanks
Hardline©
WięcejHardLine has a Shore D 55 (ASTM D2240) hardness and a 50-80% (ASTM D412) elongation for the 2:1 ratio formulation and 125-175% (ASTM D412) elongation for the 1:1 ratio formulation which is designed for harder surface protection and has excellent chemical resistance. HardLine 21-55-120 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
Properties
- High tensile strength and tear strength properties
- Very good abrasion and impact resistance
- Good chemical resistance
- Excellent corrosion resistance
- Good noise reduction
Typical applications
- Casting material for material handling eq. (chutes, hoppers, rollers)
- General purpose lining applications
- Truck beds requiring hard as nails protection
- High impact applications
- Material handling and flooring applications where products or vehicles side across a surface
- Primary & Secondary Chemical Containment
- Water and Wastewater Facilities
- Sedimentation Basins
- Pump Stations
- Pipes – Outside
- Light vehicular and foot traffic
Rhino Hybrid™
WięcejRhino Hybrid has a Shore D 55+/- (ASTM D2240) hardness and a 90-100% (ASTM D412) elongation for the 2:1 ratio formulation and a 250% (ASTM D412) elongation for the 1:1 ratio formulation. It is an excellent cost-effective alternative for HardLine® and requires high-pressure plural equipment.
Properties
- Excellent for high humidity conditions
- Excellent for low and hot temperature conditions
- Excellent for corrosion protection
- Good for chemical resistance
- Good for weatherability
Typical applications
- Primary and Secondary Containment
- Indoor use during high humidity and low and high temperature conditions
- Floors / Storage areas
- Pump Stations / Sludge Tanks
Rhino Linings has specifically formulated a number of products for use with potable water. Each of these products have been through rigorous testing and meet strict NSF/ANSI 61 standards for use with potable water.
HiChem 11-70 PW
WięcejHiChem has a Shore D 70 hardness, and it is Rhino’s most rigid formulation with the highest amount of molecular cross-linking in its formulation. Depending on the ratio formulation and gel time, elongation can range from 10% to 40%, giving this hard coating some flexibility. HiChem is available in both 2:1 and 1:1 ratio formulations. HiChem 21-70-90 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
HiChem PW meets the NSF/ANSI 61 potable water standard. HiChem PW shares the HiChem formulation as the most chemical resistant product, remaining stable in a variety of immersion applications. It is typically sprayed on metal and concrete surfaces, but it can adhere to almost any substrate. HiChem PW provides excellent corrosion resistance and will not deteriorate from most chemical attacks.
Properties
- Excellent for water and chemical resistance
- Excellent for corrosion protection
- Good for sound reduction
Typical applications
- High chemical protection applications
- Chemical processing equipment
- Concrete protection from sulfide-based gasses
- Primary containment
- Secondary containment
- Immersion service
- Oil/petroleum production
- Tank coatings
- Pipelines
- Settling tanks
- Sewage tanks
Pipeliner 5000
WięcejPipeLiner 5000 11-70 PW is a two-component, 1:1 ratio, rapid curing, elastomeric structural lining systems developed for high build applications of 30 – 500 mil cross sections. Pipeliner 5000 can be sprayed in low temperatures, extremely humid conditions and at 350-400 mils thick, or almost 3/8 of an inch, in a single pass without stress cracking.
Pipeliner 5000 has passed the rigorous testing requirements of the NSF/ANSI 61 Section 5 potable water standard and is Truesdail Laboratories listed. The polyurea/polyurethane systems are sprayed with high-pressure plural component spray equipment and can also be sprayed with a cartridge gun for repairs. The thickness of the lining will vary depending on the application, typically from a minimum of 30 mils up to unlimited thickness.
Properties
- Complies with NSF/ANSI 61 Section 5 potable water standard
- Rapid cure times for quick return to service
- High build cross sections
- Robust application window with ability to spray at low temperatures and high humidity
- High physical properties including tensile, tear, and compressive properties
- Excellent leveling properties
- Excellent impact resistance
- Excellent chemical resistance and corrosion resistance
- Bonds to virtually all substrates of any dimension, including metals, woods, concrete and fiberglass
- 100% solids, zero VOCs, no solvents
Typical applications
- Often used to repair aging and badly damaged gas, oil, sewer and water/wastewater tanks and pipelines
- Creates self-supporting polyurea pipe with a pipe
- Maintenance coating in immersion conditions
- Concrete waterproofing
- Geotextile fabric lining
- Holding tanks
- Containment areas
- Ponds and reservoirs
- Storage tanks
- Aerators, digesters, sludge bins & wet wells
Infrastructure composites
Więcej1310T resin for composite infrastructure
Features and benefits
- Fast wet-out of fiberglass reinforcements with minimal drainage from lamination
- Great fatigue resistance, strength, and reinforcement
- Flexible carbon fiber wrap conforms to any shape
- Less weight and lower thermal expansion
- Reduced installation time
Typical applications
- Infrastructure seismic upgardes (concrete beams, columns, pipes)
- Carbon fiber or glass filiment winding (pressure tanks, vessels)
- Fatigue resistant FRP manufactured parts
- Composite tooling
- Blast mitigation
- Construction equipment
- Bridges and piers
- Fuel tank sealers
Roofing
WięcejDuraTite® 1065
WięcejDuraTite 1065’s highly reflective, bright-white surface lowers roof surface temperatures, which reduces solar heat-gain, lowers cooling costs, and minimizes the effects of thermal shock on the roof and structure.
Features and benefits
- Fast Drying – Dry to touch within an hour (dependant on temperature and RH)
- Water Proof – Prevents penetration of water
- Flexible – For long term impact and crack resistance
- Durable – High tensile strength
- Labor Savings – Required mils can be applied in one coat
- Adhesion – Excellent adhesion to most surfaces
Properties
Tensile Strength (psi): (cps) | ASTM D-2370 | 450 ± 25 |
Elongation (%): | ASTM D-2370 | 455 ± 25 |
Tear Strength Die C (pli): | ASTM D-624 | 88 ± 5 |
Permeability (perms) @ 20 mils: | ASTM D-1653 | 6.75 |
Reflectivity (white): | ASTM C-1549 | 85% |
Emissivity (white): | ASTM C-1371 | .85 |
SRI Value: | 106 |
DuraTite® 1070
WięcejDuraTite 1070’s highly reflective, bright-white surface lowers roof surface temperatures, which reduces solar heat-gain, lowers cooling costs, and minimizes the effects of thermal shock on the roof and structure.
Features and benefits
- Fast Drying – Dry to touch within an hour (dependant on temperature and RH)
- Water Proof – Prevents penetration of water
- Flexible – For long term impact and crack resistance
- Durable – High tensile strength
- Labor Savings – Required mils can be applied in one coat
- Adhesion – Excellent adhesion to most surfaces
- Environmentally Friendly – Low VOCs
Properties
Tensile Strength (psi): (cps) | ASTM D-2370 | 234 ± 25 |
Elongation (%): | ASTM D-2370 | 126 ± 25 |
Tear Strength Die C (pli): | ASTM D-624 | 70.0 |
Permeability (perms) @ 20 mils: | ASTM D-1653 | 33.8 |
Weathering/UV Resistance (6,000 hrs): | ASTM G-53 | No degradation |
Reflectivity (white): | ASTM C-1371 | .69 aged 3 yr |
Emissivity (white): | ASTM C-1371 | .92 aged 3 yr |
SRI Value: | 99 |
DuraTite® 1380
WięcejFeatures and benefits
- Fast Drying – Dry to touch within an hour (dependant on temperature and RH)
- Water Proof – Prevents penetration of water
- Flexible – For long term impact and crack resistance
- Durable – High tensile strength
- Adhesion – Excellent adhesion to most surfaces
Properties
Tensile Strength (psi): (cps) | ASTM D-2370 | 485 ± 10 |
Elongation (%): | ASTM D-2370 | 265 ± 10 |
Tear Strength Die C (pli): | ASTM D-624 | 35 |
Permeability (perms): | ASTM D-1653 | 5.9 |
Weathering/UV Resistance (8,750 hrs): | ASTM G-53 | No degradation |
Reflectivity (white): | ASTM C-1549 | .65 aged 3 yr |
Emissivity (white): | ASTM C-1371 | .90 aged 3 yr |
SRI Value: | 105 initial |
DuraTite® 1395
WięcejDuraTite 1395B is a single component, brushable silicone gel designed to seal fasteners, flashing and drains. It’s excellent adhesion is suitable for direct-to-metal repairs, spray polyurethane foam, smooth built-up, smooth modified, granulated modified and EPDM.
Features and benefits
- Fast Drying – Dry to touch within an hour (dependant on temperature and RH)
- Water Proof – Prevents penetration of water
- Flexible – For long term impact and crack resistance
- Durable – High tensile strength
- Adhesion – Excellent adhesion to most surfaces
- Environmentally Friendly – Low VOCs
Properties
Tensile Strength (psi): (cps) | ASTM D-2370 | 300 ± 10 |
Elongation (%): | ASTM D-2370 | 195 ± 10 |
Tear Strength Die C (pli): | ASTM D-624 | 30 |
Permeability (perms) @ 20 mils: | ASTM D-1653 | 9.3 |
Weathering/UV Resistance (5,000 hrs): | ASTM G-53 | No degradation |
Reflectivity (white): | ASTM C-1549 | .70 aged 3 yr |
Emissivity (white): | ASTM C-1371 | .90 aged 3 yr |
SRI Value: | 110 initial |
Automotive
Więcej- Trucks
- Fleet Vehicles
- Jeeps®
- Trailers & RVs
- Construction Vehicles
- Emergency Vehicles
- Boats
- Military Vehicles
- ATVs
Rhino TuffGrip®
Features and benefits
- Excellent slip resistance… #1 reason it’s the most popular product!
- Good impact resistance
- Excellent abrasion resistance
- Excellent corrosion resistance
- Good chemical resistance
- Reduces noise from vibration and impact
- Full color range available with UV top coat
Typical applications
- Truck beds – everyday use
- Vehicle interior and exterior
- Vehicle accessories such as grille guard, side step, etc…
- Decks/Patios (from wood to concrete)
- Floors such as walk-in coolers and freezers (recommend broadcast media for non-slip flooring)
- Stairs
- Horse/Livestock trailers
- Sports vehicles
Rhino HardLine®
Features and benefits
- Excellent impact resistance
- Good abrasion resistance
- Excellent corrosion resistance
- Very good chemical resistance
- Reduces noise from vibration and impact
- Economical solution
- Black or custom dark colors available with UV top coat
Typical applications
- Truck beds, floor boards, wheel wells, rocker panels, etc…
- Landscaping and pool vehicles (excellent chemical protection)
- Commercial vehicles
- Excellent non-slip flooring when used in combination with a broadcast medium
- Trailers carrying excavators and other tracked vehicles such as snowmobile trailers
- Digesters and clarifiers
- Speaker boxes
- Hard coat for EPS foam such as signs and architectural forms
Rhino Rhino Hybrid™
Features and benefits
- Very good impact and abrasion resistance
- Excellent corrosion resistance
- Very good chemical resistance
- Reduces noise from vibration and impact
- Flexible and tenacious bond
- Full color range available with UV top coat
Typical applications
- Truck beds
- Commercial vehicles
- Excellent non-slip flooring when used in combination with a broadcast medium
- Tank lining
- Secondary containment
- Concrete restoration such as manholes
- Pipe lines, interior and exterior
- Digesters and clarifiers
- Hard coat for EPS foam such as signs and architectural forms
Rhino Extreme™
Features and benefits
- Excellent impact and abrasion resistance
- Excellent corrosion resistance
- Excellent chemical resistance
- Reduces noise from vibration and impact
- High physical properties including tensile, tear and elongation
- Full color range available with UV top coat
Typical applications
- Truck beds, floor boards, wheel wells, rocker panels, etc…
- Commercial vehicles
- Blast mitigation
- Digesters and clarifiers
- Excellent non-slip flooring when used in combination with a broadcast medium
- Secondary containment
- Concrete restoration such as manholes
- Pipe lines, interior and exterior
- Hard coat for EPS foam such as signs and architectural forms
Rhino SolarMax®
Features and benefits
- Very good impact and abrasion resistance
- Excellent corrosion resistance
- Good chemical resistance
- Reduces noise from vibration and impact
- Excellent weather protection
- High tensile strength and tear resistance properties
- Full color range available except pearls and metallics
Typical applications
- Truck beds – does not require UV top coat
- Marine applications
- Paint replacement
- Walkways, stairwells and decks
- Floor and wall protection
- Any outdoor application requiring a color fast chemical, such as fire hydrants or any other “safety” color
- Hard coat for EPS foam such as signs and architectural forms
Rhino Eco-Coat®
Features and benefits
- 100% seamless
- Will last 3x longer than plastic sheet roofs
- High physical properties including tensile, tear and elongation
- Unlike sheet roofing materials, Rhino Eco-Coat protective coating is not easily damaged
- Economical solution
Rhino Shine™
Features
- High gloss
- Chemical resistance
- Excellent moisture and environmental protection
- Protects your linings from oxidation and fading effects of the sun
- Easy to apply and comes in several colors*
- Can be applied by you or an authorized Rhino Linings® retail applicator
Rhino RhinoPro™ Cartridge System
Features and benefits
- Sprayed up to 1/16″ of an inch
- Good abrasion resistance
- Excellent corrosion resistance
- Very good chemical resistance
- Reduces noise from vibration and impact
- Excellent impact resistance
Typical applications
- Truck bed liners
- Small repair jobs in difficult to reach places
Rhino RhinoChrome™
Typical applications
- Truck beds – everyday use
- Vehicle interior and exterior
- Vehicle accessories such as grille guard, side step, etc…
- Audio speakers
- Bumper guards
- Wheel flares
- Floors
- Any surface that requires rejuvenation of faded black polyurea surfaces
The Rhino product names are owned by Rhino Linings.